• The Four Hundred
  • Subscribe
  • Media Kit
  • Contributors
  • About Us
  • Contact
Menu
  • The Four Hundred
  • Subscribe
  • Media Kit
  • Contributors
  • About Us
  • Contact
  • Running IBM i Access 7.1 and Windows 8

    October 31, 2012 Michael Sansoterra

    With the newly released Windows Server 2012 and Windows 8, I wanted to test drive Windows 8 and use it on my primary computer if possible. However, I knew a potential stumbling block would be getting IBM i Access for Windows to function. So I set out to load IBM i Access 7.1 on Windows 8.

    While doing my research, I didn’t find anything on the IBM i Access for Windows website indicating general compatibility with Windows 8. In the past, the newest version of Windows has generally been a “no-go” until a Windows specific service pack is released. But, I did find a statement from IBM indicating that Operations Console will not currently work. So if you need operations console, don’t bother with Windows 8 until further notice.

    For my test, I loaded a copy of Windows 8 32-bit into a virtual machine using the free VMWare Player. After fumbling (and grumbling) with the new Windows 8 “Metro” interface, I then installed the base version of the IBM i Access 7.1 product with no problems. I may have chosen to run the installer under Windows 7 compatibility mode; I can’t recall. If the install doesn’t work for you, try setting the compatibility level for an earlier version of Windows. In general, the compatibility level doesn’t help with the installer when the installer runs an extract and subsequent execution of a different binary. But when tinkering, it never hurts to try!

    No one wants to use the base version of the software, so I next set out to install a service pack. At the time of this writing, service pack SI45664 is the latest available for IBM i 7.1. The next scheduled service pack is November 30; hopefully IBM will have this service pack enabled for Windows 8/Windows 2012. Service pack SI45664 expects a specific security patch to be installed on your Windows machine before continuing. The service pack installer looks to see if the security patch has been installed and will fail if it has not been. However, the required fix isn’t available for Windows 8 (and may not be needed for Windows 8). So I had to download and install service pack SI39894 instead.

    Once installed, I found everything I normally use ran smoothly. I was able to use the following without a problem:

    • 5250 Terminal and Printer emulation, including macro execution
    • General System i Navigator functions, including things like NetServer configuration, basic operations, work management, etc.
    • Run SQL Scripts and general database tasks
    • AFP Workbench Viewer
    • File Transfer
    • ODBC (although the testing was somewhat limited)

    About the only problem I’ve had using it with Windows 8 over the past few weeks is that sometimes the application components “crash” upon exit.

    A Word On Windows File Sharing With NetServer

    As an aside (and for the sake of killing two birds with one stone), Windows 8 has the same issue as the last several versions of Windows when it comes to connecting to a shared IFS folder via NetServer. Due to tighter security in Windows, the security policy on your computer may need to be changed, depending on how your domain and NetServer are configured. IBM has outlined the steps to take here under the heading “LanMan Authentication.” If you can’t map a drive to the IFS on Windows 8, try this fix.

    If you need to run IBM i Access on Windows 8 right away, there is a good chance with a little tinkering you can get it running. However, if you need Operations Console or a “fixed feature” in service pack SI45664, then you’ll have to wait. There are many features in IBM i Access, so make sure to test all of your required functionality before using it in production.

    Michael Sansoterra is a DBA for Broadway Systems in Grand Rapids, Michigan. Send your questions or comments for Mike via the IT Jungle Contact page.



                         Post this story to del.icio.us
                   Post this story to Digg
        Post this story to Slashdot

    Share this:

    • Reddit
    • Facebook
    • LinkedIn
    • Twitter
    • Email

    Tags:

    Sponsored by
    Maxava

    Migrating to a new IBM Power System?

    Whether it be Power8, Power9 or Power10 – Maxava has you covered

    Our migration service moves data from the old to the new server without disruption while the business continues to operate without impacting performance. Our service avoids long periods of downtime and means businesses can reduce the risk of moving to new hardware.

    To learn more about Maxava’s migration service, call us on 888 400 1541 or VISIT maxava.com

    Share this:

    • Reddit
    • Facebook
    • LinkedIn
    • Twitter
    • Email

    Sponsored Links

    Sirius Computer Solutions:  A comprehensive, cost-effective cloud solution for IBM i users
    BCD:  FREE Webinar: Making the Business Case for Web Enabling Your Green Screens. Nov 1
    ITJ Bookstore:  Bookstore BLOWOUT!! Up to 50% off all titles! Everything must go! Shop NOW

    IT Jungle Store Top Book Picks

    Bookstore Blowout! Up to 50% off all titles!

    The iSeries Express Web Implementer's Guide: Save 50%, Sale Price $29.50
    The iSeries Pocket Database Guide: Save 50%, Sale Price $29.50
    Easy Steps to Internet Programming for the System i: Save 50%, Sale Price $24.97
    The iSeries Pocket WebFacing Primer: Save 50%, Sale Price $19.50
    Migrating to WebSphere Express for iSeries: Save 50%, Sale Price $24.50
    Getting Started with WebSphere Express for iSeries: Save 50%, Sale Price $24.50
    The All-Everything Operating System: Save 50%, Sale Price $17.50
    The Best Joomla! Tutorial Ever!: Save 50%, Sale Price $9.98

    Watson Gets Schooled By College Students And Professors IBM i Top Concerns: Build Skills, Add High Availability, Serve Users

    Leave a Reply Cancel reply

Volume 12, Number 26 -- October 31, 2012
THIS ISSUE SPONSORED BY:

ProData Computer Services
WorksRight Software
Adsero Optima

Table of Contents

  • Running IBM i Access 7.1 and Windows 8
  • Data Structures Make Good Status Parameters
  • Changing Sub Tree Authorities In An IFS Folder

Content archive

  • The Four Hundred
  • Four Hundred Stuff
  • Four Hundred Guru

Recent Posts

  • COMMON Set for First Annual Conference in Three Years
  • API Operations Management for Safe, Powerful, and High Performance APIs
  • What’s New in IBM i Services and Networking
  • Four Hundred Monitor, May 18
  • IBM i PTF Guide, Volume 24, Number 20
  • IBM i 7.3 TR12: The Non-TR Tech Refresh
  • IBM i Integration Elevates Operational Query and Analytics
  • Simplified IBM i Stack Bundling Ahead Of Subscription Pricing
  • More Price Hikes From IBM, Now For High End Storage
  • Big Blue Readies Power10 And IBM i 7.5 Training for Partners

Subscribe

To get news from IT Jungle sent to your inbox every week, subscribe to our newsletter.

Pages

  • About Us
  • Contact
  • Contributors
  • Four Hundred Monitor
  • IBM i PTF Guide
  • Media Kit
  • Subscribe

Search

Copyright © 2022 IT Jungle

loading Cancel
Post was not sent - check your email addresses!
Email check failed, please try again
Sorry, your blog cannot share posts by email.