• The Four Hundred
  • Subscribe
  • Media Kit
  • Contributors
  • About Us
  • Contact
Menu
  • The Four Hundred
  • Subscribe
  • Media Kit
  • Contributors
  • About Us
  • Contact
  • LaserVault Puts the ‘i’ in VTL

    May 2, 2018 Alex Woodie

    LaserVault is rolling out a new virtual tape library (VTL) offering that could interest IBM i shops who are looking to get away from physical tape. Dubbed ViTL, the offering emulates an IBM LTO tape library, and thanks to integration with BRMS and HelpSystems‘ Robot Save, can provide the “set it and forget it” level of automation that IBM i shops expect from enterprise storage, the company says.

    LaserVault, which is also known as Electronic Storage Corp., is no newbie when it comes to virtualizing tape products. In 2006, the Tulsa, Oklahoma, company debuted LaserVault Backup to provide customers with a cheaper alternative to dedicated VTL hardware. Four years later it launched its Universal Backup Device (UBD), a Windows-based appliance that emulated an IBM LTO tape drive.

    The new ViTL (pronounced “vital”) offering traces its roots to UBD. However, it’s different in some ways. The biggest difference is that, while UBD emulated a single IBM 3580 tape drive, ViTL emulates an entire tape library, specifically the IBM TS3200 library. That gives ViTL some important capabilities that UBD can’t match, explains Ax Synar, director of sales for LaserVault.

    “With a physical tape library, you have barcodes on the tapes, and you load the tapes into the carousel, and the tape library reads the barcodes on the tapes and passes them into BRMS or Robot Save,” Synar tells IT Jungle.

    A ViTL appliance starts at $20,000 for 4TB of SSD storage.

    “So these are virtual tapes that then become usable as media in BRMS or Robot Save,” he continues. “It acts just like if you had put tapes into the tape library with barcodes, but you didn’t have to do that. Instead, all you had to do was just go into Web interface, put in how many tapes that you wanted, based on how many slots.”

    ViTL has the capability to manage and track up to 4,000 virtual tapes, which should give customers plenty of headroom. Some of LaserVault’s IBM i clients have dozens of systems or LPARs, which translates into hundreds of backup tapes to manage, so 4,000 should be more than enough.

    Because the tapes are virtual, there’s no limit on the size of the backups stored on each virtual tape. So if an IBM i shop has a 5TB backup, it no longer needs to split the backup across two physical LTO cartridges, Synar says. That’s also the case with UBD. The big difference between UBD and ViTL is the lack of a need to manually tapes, Synar says.

    “With UBD you had to add them manually, which is not a real big deal,” Synar says. “But when people use the BRMS or Robot Save product and virtual tape library, they want a tape library that does the same thing they were doing before. That’s why we came up with ViTL, because we wanted a solution that would match what a physical tape library does based on how it interfaces automatically, how it automatically loads for saves, and automatically loads for restores of tape.”

    The restore process is more streamlined and automated with ViTL. With UBD, users needed to know which virtual tape contained the data they needed. With ViTL, that information is tracked through integration with BRMS or Robot Save, which will automatically locate the data for the customer.

    ViTL features a Web browser-based user interface.

    “BRMS or Robot knows which tape that the backup is on,” Synar says. “You don’t have to know what tape it’s on. You just have to get a list of what you want to restore, you choose what you want to restore, and then it automatically loads the virtual tape into the drive for you, and does the restore.”

    LaserVault offers several purchasing options with ViTL, which runs on the Windows operating system and requires at least Windows Server 2012. Customers who have their own physical Windows Server or Windows Server-based virtual machine (VM) can get a license for the ViTL software for $15,000.

    LaserVault also offers a pre-built appliance that’s equipped with 4TB of solid state drives (SSDs) software, in addition to the ViTL software and a Windows Server license, for $20,000. Systems can be ordered with up to 64TB, Synar says, and customers who need more than that can be accommodated. Customers can also connect ViTL to storage products offered by Quantum, Dell, HPE, and Cohesity, he says.

    ViTL appliances connect to IBM Power Systems hosts through Fibre Channel and SAS connections. The ViTL can support up to 16 physical FC or SAS ports. For each physical FC or SAS port, ViTL can present a single VTL, which means the offering can support up to 16 VTLs with a single product.

    The software supports backups from Linux and AIX environments, in addition to IBM i. It supports compression, provides 256-bit AES encryption, and supports D-mode IPL, the company says. Two forms of data replication are available, including the capability to replicate a virtual tape to another disk, and via the company’s Replicador offering.

    Synar says the market for VTL and disk-to-disk (D2D) backup solutions is strong in the IBM i community. While tape is still fairly pervasive and has a role in archive and disaster recovery, there’s a strong incentive to get off tape for local and hot backups.

    “The iSeries guys are kind of behind as far as getting rid of tape,” he says. “There’s a lot of people who are planning their upgrades from current Power Systems, whether they be Power 5, Power 6, or Power 7, to Power 8 or Power 9 and not wanting to buy tape drives or tape libraries.”

    What’s more, the new LTO 7 generation of tape libraries and tape drives are “getting a little expensive,” he adds. “People who are looking to get away from tapes with new Power 8 and Power 9 boxes, would be beneficial to start looking at a disk-to-disk solutions, especially a tape library solution if they’re using BRMS or Robot Save.”

    RELATED STORIES

    LaserVault Moves IBM i Backups Forward

    LaserVault Goes SCSI with New Backup Device

    LaserVault Debuts New Backup Option for IBM i

    LaserVault Launches Hybrid Cloud Backup Appliance for IBM i

    LaserVault Aims for Simplicity with New IBM i Backup Appliance

    LaserVault Shrinks System i Backups with Data De-Duplication

    Share this:

    • Reddit
    • Facebook
    • LinkedIn
    • Twitter
    • Email

    Tags: Tags: BRMS, IBM i, Virtual Tape Library, ViTL, VTL

    Sponsored by
    Krengeltech

    When it comes to consuming web APIs on your IBM i, your options often boil down to one of two things:

    First, you end up having to rely on a variety of open source and non-RPG solutions. This adds developer complexity, taking away time that could have been better spent invested in other projects. Of course, open source software is free, but generally comes at the cost of no professional support, which adds an element of risk in your production environment. RXS is completely professionally supported, and is complemented by a staff of trained IBM i developers who can address your nuanced development challenges, head on.

    Second, if you choose not to pursue an open-source solution, you’re often left having to shake up your current program architecture with proprietary software, external dependencies, and partial RPG implementations – many of which are sub-par compared to RPG-XML Suite’s wide range of features. RXS aims to simplify the efforts of developers with tools like code generators, useful commands, and subprocedures written in 100% RPG – no Java. Because they are entirely RPG, the RXS subprocedures are easy to add to new or existing ILE programs and architecture, helping to cut your development time. RPG-XML Suite offers powerful capabilities in an accessible, easy-to-implement format.

    With RPG-XML Suite, you can accomplish a variety of complex tasks, such as:

    • Calling REST and SOAP web services from your IBM i
    • Offering APIs from your IBM i
    • Creating JSON & XML
    • Parsing JSON & XML
    • Text manipulation, Base64 encoding/decoding, CCSID handling, hashing and encryption functions, and more.

    To try RXS for yourself, we recommend a free proof of concept, which not only gives you access to all of RPG-XML Suite’s subprocedures and utilities but also includes a tailor-made software demonstration that can be used as a starting point for your future API implementations.

    For a free proof of concept, contact us at sales@krengeltech.com, or visit our website for more information.

    Share this:

    • Reddit
    • Facebook
    • LinkedIn
    • Twitter
    • Email

    Four Hundred Monitor, May 2 GDPR and IBM i: The Final Countdown

    Leave a Reply Cancel reply

TFH Volume: 28 Issue: 33

This Issue Sponsored By

  • ARCAD Software
  • Maxava
  • ASNA
  • Software Concepts
  • COMMON

Table of Contents

  • Survey Paints a Picture of IBM i Community, Product Usage
  • GDPR and IBM i: The Final Countdown
  • LaserVault Puts the ‘i’ in VTL
  • Four Hundred Monitor, May 2
  • IBM i PTF Guide, Volume 20, Number 17

Content archive

  • The Four Hundred
  • Four Hundred Stuff
  • Four Hundred Guru

Recent Posts

  • IBM i 7.3 TR12: The Non-TR Tech Refresh
  • IBM i Integration Elevates Operational Query and Analytics
  • Simplified IBM i Stack Bundling Ahead Of Subscription Pricing
  • More Price Hikes From IBM, Now For High End Storage
  • Big Blue Readies Power10 And IBM i 7.5 Training for Partners
  • IBM Delivers More Out-of-the-Box Security with IBM i 7.5
  • Groundhog Day For Malware
  • IBM i Community Reacts to IBM i 7.5
  • Four Hundred Monitor, May 11
  • IBM i PTF Guide, Volume 24, Number 19

Subscribe

To get news from IT Jungle sent to your inbox every week, subscribe to our newsletter.

Pages

  • About Us
  • Contact
  • Contributors
  • Four Hundred Monitor
  • IBM i PTF Guide
  • Media Kit
  • Subscribe

Search

Copyright © 2022 IT Jungle

loading Cancel
Post was not sent - check your email addresses!
Email check failed, please try again
Sorry, your blog cannot share posts by email.