• The Four Hundred
  • Subscribe
  • Media Kit
  • Contributors
  • About Us
  • Contact
Menu
  • The Four Hundred
  • Subscribe
  • Media Kit
  • Contributors
  • About Us
  • Contact
  • Warning: IBM Says Some SATA Disks Are Going to Sleep

    March 2, 2009 Timothy Prickett Morgan

    If you have a BladeCenter blade server or a System x tower or rack server in your shop sitting alongside your AS/400, iSeries, or System i machinery, listen up. IBM is warning customers that SATA drives made by Seagate Technology and sold by Big Blue are, in very rare cases, going to sleep and not waking back up.

    IBM has posted a note in its disk subsystem support pages that explains what machinery could be affected. The short of it is that after power cycling a server or a storage array using the SATA drives, the drive refuses to spin up. The issue has to do with Seagate firmware, and in particular with firmware level BB10 with the following Seagate drive models: ST31000340NS, ST3250310NS, ST3500320NS, ST3750330NS. You can find out what drives you have in your systems using the ServerRAID or MegaRAOD storage manager software, by using IBM’s disk drive update utility, the BIOS on the disk controllers, or by opening up a box and looking at the model numbers. The drives in question come with 250 GB, 500 GB, 750 GB, and 1 TB capacities and spin at 7200 RPM.

    IBM says that the firmware will be updated in the first quarter (which ends in a few weeks), and in the meantime, don’t power cycle your servers and disk arrays if you have these SATA drives in them. The error that causes the drives to go to sleep only happens after a power cycle, and it involves a “rare condition” whereby the disk’s event log pointer is set to an invalid location, and this forces the drive into a failsafe mode to prevent data loss or corruption. Seagate originally reported the issue back in mid-January, and a fix on some of these “Barracuda” disks did not work.

    “Should a drive become inaccessible, customers should contact their IBM representative,” a company spokesperson told me last Friday as we were going to press. “IBM is working with Seagate, which will provide a firmware update shortly.”

    System i and Power Systems machines use SCSI or SAS drives, not SATA drives, and are therefore not affected by this firmware issue.



                         Post this story to del.icio.us
                   Post this story to Digg
        Post this story to Slashdot

    Share this:

    • Reddit
    • Facebook
    • LinkedIn
    • Twitter
    • Email

    Tags: Tags: mtfh_rc, Volume 18, Number 9 -- March 2, 2009

    Sponsored by
    Raz-Lee Security

    With COVID-19 wreaking havoc, cybercriminals are taking advantage of the global impact that it has had on our families, our businesses and our societies. It is more important now than ever to ensure that IT systems are protected, so that when all of this is behind us, we can get back to business as usual as quickly as possible.

    iSecurity Anti-Ransomware protects organizations against ransomware attacks and other kinds of malware that may access and change business-critical data on your IBM i. It even protects against zero-day attacks. Anti-Viruses can only report on the damage an attack has caused, but not stop it.

    iSecurity Anti-Ransomware has been recently enhanced with a Self-Test feature that allows you to simulate a ransomware attack on your IBM i. The simulated attack is limited to the test folder and cannot harm any other folders or files. This new feature lets organizations see how they are protected against known or unknown ransomware.

    Key Features:

    • Real-time scanning for known and unknown ransomware threats.
    • Blocks and disconnects the intruder.
    • Instantaneously sends alerts to SIEM as well as the offending computer.
    • Self-Test for attack simulation
    • Classification of the attack based on log.
    • Automatic updates with the most current ransomware definitions.

    Contact us at https://www.razlee.com/anti-ransomware

    Share this:

    • Reddit
    • Facebook
    • LinkedIn
    • Twitter
    • Email

    CDW Taps Linoma for Database Encryption xTuple Reports Strong Growth of Open Source ERP

    Leave a Reply Cancel reply

TFH Volume: 18 Issue: 9

This Issue Sponsored By

    Table of Contents

    • IBM Adds i Shops to Expanded p Shop Trade-In Deal
    • IBM and Resellers Do the iLoyalty Blitz
    • Server Sales Slumped As 2008 Stumbled to the Holidays
    • Mad Dog 21/21: That’ll Teach ‘Em
    • Healthcare and Utilities Lead Vertical Markets in IT Spending
    • Reader Feedback on Colonizing Endicott and As I See It: A Novel Idea
    • A Little More Color on Power Systems i Sales in Q4
    • Warning: IBM Says Some SATA Disks Are Going to Sleep
    • Dataram Hit by the Economic Downturn, But Ready to Do Biz
    • New IBM i-Related Redbooks, and a Bunch More in the Works

    Content archive

    • The Four Hundred
    • Four Hundred Stuff
    • Four Hundred Guru

    Recent Posts

    • Power10 Midrange Machine: The Power E1050
    • IBM Puts The Finishing Touches On PowerHA For IBM i 7.5
    • Guru: Regular Expressions, Part 2
    • Get Your Security Education, And Not From The School Of Hard Knocks
    • IBM i PTF Guide, Volume 24, Number 33
    • Power10 Entry Machines: The Power S1024 And Power L1024
    • Thoroughly Modern: Latest IT Trends – Bring Security, Speed, And Consistency To IT With Automation
    • Big Blue Unveils New Scalable VTL For IBM i
    • As I See It: Thank God It’s Thursday
    • IBM i PTF Guide, Volume 24, Number 32

    Subscribe

    To get news from IT Jungle sent to your inbox every week, subscribe to our newsletter.

    Pages

    • About Us
    • Contact
    • Contributors
    • Four Hundred Monitor
    • IBM i PTF Guide
    • Media Kit
    • Subscribe

    Search

    Copyright © 2022 IT Jungle

    loading Cancel
    Post was not sent - check your email addresses!
    Email check failed, please try again
    Sorry, your blog cannot share posts by email.