• Four Hundred Monitor, December 4

  December 4, 2019 Jenny Thomas

  The year may be winding down, but before you log off for the holidays, there is plenty of action happening around the IBM i community. This week, IT Jungle’s own Timothy Prickett Morgan will be participating in a webinar to talk about all things cloud as they relate to the IBM i platform. You can find out how to listen in below in our Redbooks, White Papers, Blogs, and Other Resources section below. Then next week, Pete Massiello is hosting a webinar to take a look back at the IBM i in 2019. There’s more information on that event in …

  Read more

• IBM i PTF Guide, Volume 21, Number 48

  December 4, 2019 Doug Bidwell

  This is important: If you are running IBM i 7.3, the Db2 for IBM i Group SF99703, Level 16, dated November 13 is defective. Do not install this group. Instead, install Level 17, which was made available on November 25. If you are not able to do that, contact IBM for assistance. Our understanding is that critical PTFs were not included in Level 16 update for the Db2 group, and the resulting issue is that both the A and B side will lock up and require a SLIP install to repair. You want to avoid that.

  Also, there is updated …

  Read more

• Db2 For IBM i 7.3 Hits A Bad Patch

  December 2, 2019 Timothy Prickett Morgan

  As you know, we are among the people in the IBM i community who are always telling you to keep current on your PTF patches for the best operating system available on Power Systems. (No, we are not talking about AIX or Linux.) But every now and again, as happens with all operating systems, something gets fixed and the fix is worse than the problem it was solving.

  That has apparently happened with the database patches for the Db2 for i relational database management system embedded in the IBM i 7.3 release once the Db2 Group patches from November 13 …

  Read more

• Converge Technology Emerges As Reseller Powerhouse

  December 2, 2019 Alex Woodie

  Here’s a computer company you may not have heard about: Converge Technology Solutions. Over the past two years, the publicly traded Toronto, Canada-based company has completed numerous acquisitions of value added resellers (VARs) and private cloud providers that ply the IBM Power Systems waters – including Key Information Systems, Corus360, and Essex Technology Group, to name a few – and there’s no reason to think it will stop in 2020.

  Converge Technology Solutions was founded in 2017, when it began executing its goal to acquire a number of smaller VARs and consolidate the “fragmented” reseller landscape, according to chief executive …

  Read more

• Guru: End Of Year Feedback

  December 2, 2019 Ted Holt

  The year has flown by. Before we know it, it will be 2020. The century is flying by, too. We’ve almost consumed a fifth of it. That seems like a good excuse to see what we might glean from some of your feedback. It’s been a while. More to come next week!

  Several readers wrote regarding the need to remove hard-coded values from programs. Jim brought up the problem of compile-time tables and arrays.

  I find cases where data is hard coded (state names, product categories are a few examples) for tables or arrays in dozens of programs.

  I wish …

  Read more

• Power S812 Gets Another Reprieve, And Other Power Systems Stuff

  December 2, 2019 Timothy Prickett Morgan

  For whatever reason, Big Blue did not create a cut-down version of the Power9 entry server aimed at the smallest of the small businesses that run themselves on the IBM i platform. Meaning there was no Power S912 or Power S912 Mini replacement for the Power S812 and its specially priced Power S812 Mini. (The former is based on the Power9 chip, while the latter is based on the older Power8 chip, which has a lot less oomph per core.)

  Back in March, IBM extended the life of the Power S812 and its Mini variant until November 29 of this …

  Read more

• IBM i PTF Guide, Volume 21, Number 47

  December 2, 2019 Doug Bidwell

  We hope that everyone in the United States had a Happy Thanksgiving, and we are still “playing ketchup” on the PTF leftovers before that holiday, which gets us into the final stretch of 2019, rolled around. Ketchup is good on turkey, but cranberry sauce is better.

  Just a reminder to everyone: IBM i 7.2 will reach end of support on April 30, 2021. That may seem like a long time from now, but you will be surprised at how fast it comes up. IBM did not say very much in its end of support announcement, which you can see here …

  Read more

• IBM i Marketing: Not A Thankless Job

  November 25, 2019 Timothy Prickett Morgan

  For over one decade of the three that I called New York City my home, I was the president of the board of directors in the co-operative apartment building in which I lived. For many years, I ran a half rack of servers and storage in the kitchenette in our apartment to support IT Jungle’s website and subscription database, and I ran T1 lines up the outside of the building and in through the window. It was unconventional running a business that way, but there was no cloud computing as we know it, and certainly not at the prices you …

  Read more

• Thoroughly Modern: Driving Your Synon Applications Forward

  November 25, 2019 Chris Koppe

  CA 2E, formerly known Synon and still called that by many, is a highly specialized programming language and a productive 4GL development environment. Used by a small number of IBM i shops, Synon has enabled organizations to rapidly create complex applications and systems that run the core of their business operations. These applications are often homegrown and serve as the backbone of business processing while providing organizations with differentiation against their competition.

  Although Synon applications provide great value, they are inherently difficult to access and share information with the organization. In many cases, these operations ecosystems are 15 to 25 …

  Read more

• Guru: Code Coverage via CL Command

  November 25, 2019 Susan Gantner

  This is my third tip on using RDi’s Code Coverage support. In the first tip, we explored setting up a test run using Service Entry Points (a.k.a. SEPs). In the second one, I covered how to create a configuration for the test run. Here we’ll see how to use a CL command to run a Code Coverage test session without requiring interaction with RDi (except for reporting.)

  Before seeing how to do it, it may be good to discuss why you may prefer to use this approach. Simply put, it makes it easier to automate the testing process …

  Read more

Previous Articles Next Articles